Is it OK to use Pine-Sol on hardwood floors?
It's safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle. For more information about the Pine-Sol® lineup of products, visit our FAQs page.
Mix 1/4 cup of Pine-Sol® Multi-Surface Cleaner with one gallon of warm water. Mop your floor with the mixture. But, first wring out the mop so it's just damp, not soaking wet. Also, try not to let liquid pool on the floor, which can warp it and cause streaks.
Remove tougher stains from the kitchen floor by not diluting the Pine-Sol with water. Apply the solution direction to the stain. Rinse the floor with clean water afterward.
Pine-Sol is a gentle cleaner and the best way to clean linoleum floors. Dilute ¼ cup Pine-Sol® to a gallon of water. Wipe those dirty floors down with the solution using a mop or sponge. Be sure not to allow the solution to pool; you should never let linoleum get too wet.
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.
Sticky floors happen when you have not passed the mop to remove too much cleaning solution or the wrong cleaning solution. It can also be due to dirty water used in rinsing your mop.
- Mix about a quarter cup (60ml) of distilled vinegar in every one gallon (3.8 L) warm water and mix well for effective action. ...
- Add a few drops of essential oil to the solution. ...
- Dampen the mop and wring properly to avoid excess solution from spilling on the floor.
Steps For An Expert Clean
Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
What can you not mix with Pine-Sol?
You shouldn't mix Pine-Sol and bleach because doing so is extremely dangerous. What is this? The active ingredient in Pine-Sol is glycolic acid. According to the Department of Health, mixing chlorine bleach with acid produces chlorine gas.
Keep Pests Away
The pine smell is repulsive to most animals. There's a bonus, too. You get clean cans, and no flies. Insects aren't fans of pine, either!
Dish soap is a gentle cleaner that won't damage the natural wood, and it's perfect for light jobs and daily upkeep alike. In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water.
Wet mopping can cause your wood floors to swell
The rule of thumb here is that water and wood do not mix. Wood can act like a sponge when it's around water. Too much, and it will start to swell up. Too little, and it the boards can shrink as they dry out.
- Wipe up spills immediately. ...
- Dust mop daily. ...
- Dust mop at least weekly to remove loose soil.
- Avoid using a vacuum with a beater bar that can scratch or dent floors.
- Place doormats inside and outside entrance doors to catch dirt.
Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
2 REASONS YOUR FLOORS ARE STILL DIRTY AFTER CLEANING
Thinking that wet equals clean, they then forget to rinse out their mop pad, resulting in a mop pad that is fully saturated with dirty water. Continuing to use the mop pad on the floor leads to smearing dirt, not lifting it.
Mopping with dirty water usually causes that buildup and dirty appearance, even though it was just mopped. Dirt is added to a mop bucket each time the mop is dunked into the water, if you don't change the water you are just transferring the dirt and grime around the floors through the dirty water.
Mop around the edges first, then move to the middle of the floor, using overlapping, figure-eight strokes. When one side of the mop gets dirty, turn the mop over to the clean side. When both sides are dirty, wash the mop in the bucket; otherwise, you'll be spreading dirt around instead of removing it.
Do mop a wood floor with a damp mop or cloth. String mops are less common these days, and that's not a bad thing for cleaning wood floors. They can be tough to evenly wring out and use. Microfiber cloths are great for using with wood flooring.
What is the best product to make hardwood floors shine?
- 1 Weiman Hardwood Floor Polish.
- 2 Bona Hardwood Floor Polish.
- 3 Quick Shine Hardwood Floor Polish.
- 4 Rejuvenate Hardwood Floor Polish.
- 5 Restore-A-Floor Hardwood Floor Polish.
- 6 Howard Products Hardwood Floor Polish.
- 7 Murphy Hardwood Floor Polish.
- Try buffing and polishing with a commercial-grade buffer.
- Use a hardwood floor polishing sealant.
- Clean markers with toothpaste and a clean cloth.
- Apply a wood floor cleaner or oil soap for a high-gloss clean.
KILLS 99.9% OF GERMS, INCLUDING THE COVID-19 VIRUS*
There's a reason this powerful disinfectant cleaner has been in your family for generations: it works. Since 1929, Original Pine-Sol® has been cleaning America's toughest dirt, grease and grime.
Wipe down the toilet tank, lid, seat cover and outside of the bowl, reapplying more cleaner as needed. Rinse each surface with water. Splash Pine-Sol® into the toilet bowl and hit every crevice with your trusty toilet brush. Let it sit for a few minutes and flush.
Clorox said some of the affected Pine-Sol products might contain a bacteria called Pseudomonas aeruginosa, which can harm people with compromised immune systems or people with external medical devices because they pose “a risk of serious infection that may require medical treatment,” according to the Consumer Product ...
The recalled products may contain bacteria, including Pseudomonas aeruginosa, an environmental organism found widely in soil and water. People with weakened immune systems or external medical devices who are exposed to Pseudomonas aeruginosa face a risk of serious infection that may require medical treatment.
Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
The major difference between pine-sol and Lysol is that pine-sol has a longer contact time of 10 minutes as opposed to Lysol, which needs only 2 to 5 minutes to work effectively. On a level of similarities, they are both excellent surface cleaners that will take care of your cleaning needs.
I love it, & its so much cheaper & works so much better than your regular everyday cleaners. Mix a 1/2 cup pinesol with 2 cups of vinegar, & a 1/2 cup of water in a spray bottle. Spray surface with mixture. Spills immediately started to lift.
Strong scents deter rats and mice, specifically peppermint and Pine-Sol.
Do roaches like Pine-Sol?
Pine-Sol and Fabuloso are strong, all-purpose household cleaners. Similar to bleach, these products kill roaches on contact. Some homeowners suggest spraying Pine-Sol around the outside of your house to keep cockroaches away.
Ants are looking for food and will accept just about any crumb that they encounter as a food source. Wipe everything down with Pine Sol. For some reason, the ants hate the scent. Other methods are to use a mix of one part sugar to two parts of borax and sprinkle this outside of your RV.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Dish soap is a gentle cleaner that won't damage the natural wood, and it's perfect for light jobs and daily upkeep alike. In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water.
Sweep the floor with a broom or dust mop at least once per week to remove as much dirt from the floor as possible. Mop with a slightly damp mop, but don't over-use cleansers -- save them for the tough spills. Clean all spills immediately.
Strong scents deter rats and mice, specifically peppermint and Pine-Sol.
Roughly 37 million bottles of Pine-Sol products have been recalled because they could contain a potentially harmful bacteria.
Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Do mop a wood floor with a damp mop or cloth. String mops are less common these days, and that's not a bad thing for cleaning wood floors. They can be tough to evenly wring out and use. Microfiber cloths are great for using with wood flooring.